Surgeons in 3D Printing

Dr Ruchi Pathak Kaul

Surgeons in 3D Printing is a Podcast with the vision to trigger conversations, collaborations and knowledge transfer on 3D Printing and emerging technologies by surgeons, engineers, entrepreneurs and researchers. This is a relaxed conversational pre-recorded show that centers around Medical applications of 3D Printing and alike technologies like AR/VR/XR. The mission we’re on is one of education and inspiration for anyone looking to start learning the technology for patient benefit.Our audience values authenticity and education. read less
ScienceScience
Start Here
Experience of an in-house 3D planning and printing unit in a paediatric hospital – How to combine clinical practice, simulation ,training & research.
15-11-2021
Experience of an in-house 3D planning and printing unit in a paediatric hospital – How to combine clinical practice, simulation ,training & research.
Dr Josep Munuera Radiologist MD, Neuroradiologist EBNR, PhD. currently head of department (area of quality, innovation and research) of the Hospital & Radiology Department. He is In charge of coordinating all development projects that include imaging techniques. In addition to having a special dedication to the optimization of the 3 Tesla MRI system dedicated exclusively to Pediatric patients. He is presently the Member of the 3D department (3D4H) leading the quality area and co-director of the postgraduate course at the Polytechnic University of Barcelona: Expert3D.   Arnau Valls Esteve is an engineer in the innovation department of the Sant Joan de DéuHospital in Barcelona, Leading national and European projects in digital medicine, coordinator of the 3D4H surgical planning unit of the same hospital and co-director of the postgraduate course Expert3D: Medical Image post-processing programme: 3D Printing and Artificial Intelligence of the Polytechnic University of Catalonia (UPC-BarcelonaTECH).     Find about the course : https://www.expert3d.eu/   Visit the 3D UNIT: https://www.sjdhospitalbarcelona.org/en/3d-unit   Ruchi Pathak Kaul, is a TEDx & Professional Speaker, Author, Maxillofacial Surgeon,Podcaster & Entrepreneur. She is the Founder & Chairman of Reconstructive Healthcare Solutions (RHS) Pvt Ltd, India & Beyond Exponential ltd, UK. Ruchi brings to the table a rich Clinical & Research experience of more than 15 years in healthcare sector. She started as a dentist followed by maxillofacial surgery and then dwelled into research on Medical 3D Printing from AIIMS, New Delhi. She then found Reconstructive Healthcare Solutions Pvt ltd, a health-tech start-up. Ruchi is highly enterprising and is passionate about spreading 3D Printing and emerging technologies like AR/VR/XR across the surgical community for enhanced surgical experience and state of art patient care. Presently she is also the ambassador of Women in 3D Printing, New Delhi, State President of  Haryana for Science & Technology at WICCI, India and host of another Podcast Unstoppable in STEAM. Website https://ruchipathakkaul.com/ LinkedIn   www.linkedin.com/in/ruchipathakkaul   Book a 30 minute clarity call for your 3D Printing project with (RHS) to know more! https://calendly.com/discovery-call-with-ruchi/virtualmeetup

Episodes

Experience of an in-house 3D planning and printing unit in a paediatric hospital – How to combine clinical practice, simulation ,training & research.
15-11-2021
Experience of an in-house 3D planning and printing unit in a paediatric hospital – How to combine clinical practice, simulation ,training & research.
Dr Josep Munuera Radiologist MD, Neuroradiologist EBNR, PhD. currently head of department (area of quality, innovation and research) of the Hospital & Radiology Department. He is In charge of coordinating all development projects that include imaging techniques. In addition to having a special dedication to the optimization of the 3 Tesla MRI system dedicated exclusively to Pediatric patients. He is presently the Member of the 3D department (3D4H) leading the quality area and co-director of the postgraduate course at the Polytechnic University of Barcelona: Expert3D.   Arnau Valls Esteve is an engineer in the innovation department of the Sant Joan de DéuHospital in Barcelona, Leading national and European projects in digital medicine, coordinator of the 3D4H surgical planning unit of the same hospital and co-director of the postgraduate course Expert3D: Medical Image post-processing programme: 3D Printing and Artificial Intelligence of the Polytechnic University of Catalonia (UPC-BarcelonaTECH).     Find about the course : https://www.expert3d.eu/   Visit the 3D UNIT: https://www.sjdhospitalbarcelona.org/en/3d-unit   Ruchi Pathak Kaul, is a TEDx & Professional Speaker, Author, Maxillofacial Surgeon,Podcaster & Entrepreneur. She is the Founder & Chairman of Reconstructive Healthcare Solutions (RHS) Pvt Ltd, India & Beyond Exponential ltd, UK. Ruchi brings to the table a rich Clinical & Research experience of more than 15 years in healthcare sector. She started as a dentist followed by maxillofacial surgery and then dwelled into research on Medical 3D Printing from AIIMS, New Delhi. She then found Reconstructive Healthcare Solutions Pvt ltd, a health-tech start-up. Ruchi is highly enterprising and is passionate about spreading 3D Printing and emerging technologies like AR/VR/XR across the surgical community for enhanced surgical experience and state of art patient care. Presently she is also the ambassador of Women in 3D Printing, New Delhi, State President of  Haryana for Science & Technology at WICCI, India and host of another Podcast Unstoppable in STEAM. Website https://ruchipathakkaul.com/ LinkedIn   www.linkedin.com/in/ruchipathakkaul   Book a 30 minute clarity call for your 3D Printing project with (RHS) to know more! https://calendly.com/discovery-call-with-ruchi/virtualmeetup
Join a free 30-min DIY assistive technology lesson by Makers Making Change with Suzanne Winterflood
08-11-2021
Join a free 30-min DIY assistive technology lesson by Makers Making Change with Suzanne Winterflood
Suzanne Winterflood is the Regional Coordinator, Central region at Makers Making Change, a program of Neil Squire Society, a non-profit organization. Makers Making Change uses 3D Printing to provide affordable assistive technology for people with disabilities. From a young age in England, UK Suzanne has supported people with disabilities. Since arriving in Winnipeg, Manitoba in 2007 she has worked in the technology sector ensuring equity for minority Canadians. Her role at MMC enables her to continue to support her local community by combining her knowledge, skills and experience.She Obtained Masters in Industrial & Organization Psychology at University of East London.She is currently the Interim President of Canadian Cerebral Palsy Sports Association, a Crisis Counsellor and is a Speaker at large conferences across Canada and Internationally. If you’d like to find out more about Makers Making Change visit www.makersmakingchange.com  REGISTER to be a part of our Guinness World Record attempt at  www.ATWorldRecord.com Ruchi Pathak Kaul, is a TEDx & Professional Speaker. With an experience of +15 years in clinical practice & medical research she now helps medical/dental professionals overcome challenges in the understanding and implementation of 3D Printing & alike technologies. Technology has the potential to drastically enhance the delivery of present-day healthcare services. The problem is that only 10% of medical/dental professionals are familiar with the implementation and understanding of technology. She delivers talks, workshops and courses to help professionals understand and implement 3D Printing Technology with a low learning curve.   Website https://ruchipathakkaul.com/   Book a 30-minute clarity call to connect on 3D Printing projects: https://calendly.com/discovery-call-with-ruchi/virtualmeetup   Connect on LinkedIn www.linkedin.com/in/ruchipathakkaul
Enabling medical 3D printing through standards and regulations with Mr Khalid Rafi
01-11-2021
Enabling medical 3D printing through standards and regulations with Mr Khalid Rafi
Khalid Rafi is the Senior Lead for Additive Manufacturing Programs Development at ASTMInternational. He is responsible for various AM education and certification programs from ASTM with a vision to empower AM community to support wider AM adoption. Before joining ASTM,Rafi was the Technical Lead for Additive Manufacturing at Underwriter’s Laboratories (UL). He is having 20 years of industrial experience with over 10 years focusing primarily on additive manufacturing. Rafi also published 30 journal articles and did 50 over presentations at international conferences.     or https://www.astm.org/. Also, you can write to him directly at krafi@astm.org Ruchi Pathak Kaul, is a TEDx & Professional Speaker, Author, Maxillofacial Surgeon,Podcaster & Entrepreneur. She is the Founder & Chairman of Reconstructive Healthcare Solutions (RHS) Pvt Ltd, India & Beyond Exponential ltd, UK. Ruchi brings to the table a rich Clinical & Research experience of more than 15 years in healthcare sector. She started as a dentist followed by maxillofacial surgery and then dwelled into research on Medical 3D Printing from AIIMS, New Delhi. She then found Reconstructive Healthcare Solutions Pvt ltd, a health-tech start-up. Ruchi is highly enterprising and is passionate about spreading 3D Printing and emerging technologies like AR/VR/XR across the surgical community for enhanced surgical experience and state of art patient care. Presently she is also the ambassador of Women in 3D Printing, New Delhi, State President of  Haryana for Science & Technology at WICCI, India and host of another Podcast Unstoppable in STEAM. Website https://ruchipathakkaul.com/ LinkedIn https://www.linkedin.com/in/dr-ruchi-pathak-kaul-8b439236/ Book a 30 minute clarity call for your 3D Printing project with (RHS) to know more! https://calendly.com/discovery-call-with-ruchi/virtualmeetup
3D Printing in Craniofacial Deformities with Dr Krzysztof Dowgierd
18-10-2021
3D Printing in Craniofacial Deformities with Dr Krzysztof Dowgierd
This week we welcome to the podcast Dr Krzysztof Dowgierd who is Head of the Cranio-facial Department of the Specialised Children's Hospital in Olsztyn University of Warmia, Mazury, School of Medicine, Department of Clinical Paediatrics in Poland. Please visit their website - www.chirurgiaszczekowa.olsztyn.pl Find Mr Dowgierd at https://www.linkedin.com/in/krzysztof-dowgierd-5b734364/ Surgeons in 3D Printing is a Podcast with the vision to trigger conversations, collaborations and knowledge transfer on 3D Printing and emerging technologies by surgeons, engineers, entrepreneurs and researchers. Know your host: Ruchi Pathak Kaul, is a TEDx & Professional Speaker. With an experience of +15 years in clinical practice & medical research she now helps medical/dental professionals overcome challenges in the understanding and implementation of 3D Printing & alike technologies. Technology has the potential to drastically enhance the delivery of present-day healthcare services. The problem is that only 10% of medical/dental professionals are familiar with the implementation and understanding of technology. She delivers talks, workshops and courses to help professionals understand and implement 3D Printing Technology with a low learning curve. Website https://ruchipathakkaul.com/ Book a 30-minute call to discuss on 3D Printing projects: https://calendly.com/discovery-call-with-ruchi/virtualmeetup LinkedIn https://www.linkedin.com/in/dr-ruchi-pathak-kaul-8b439236/
Augmented Reality & Virtual Reality for Healthcare with Mr Pradeep Khanna
04-10-2021
Augmented Reality & Virtual Reality for Healthcare with Mr Pradeep Khanna
Mr Pradeep Khanna is the Executive Director, Asia Pacific at VR AR Association and an alumini of Indian Institute of Technology, New Delhi.In this episode he discusses fundamentals of AR/VR and need of healthcare to adopt AR/VR for education & Training. Find Mr Pradeep Khanna at:          linkedin.com/in/pradeep-khanna-b445743        Surgeons in 3D Printing is a Podcast with the vision to trigger conversations, collaborations and knowledge transfer on 3D Printing and emerging technologies by surgeons, engineers, entrepreneurs and researchers. Know your host: Ruchi Pathak Kaul, is a TEDx & Professional Speaker, Author, Maxillofacial Surgeon,Podcaster & Entrepreneur. She is the Founder & Chairman of Reconstructive Healthcare Solutions (RHS) Pvt Ltd, India & Beyond Exponential ltd, UK. Ruchi brings to the table a rich Clinical & Research experience of more than 15 years in healthcare sector. She started as a dentist followed by maxillofacial surgery and then dwelled into research on Medical 3D Printing from AIIMS, New Delhi. She then found Reconstructive Healthcare Solutions Pvt ltd, a health-tech start-up. Ruchi is highly enterprising and is passionate about spreading 3D Printing and emerging technologies like AR/VR/XR across the surgical community for enhanced surgical experience and state of art patient care. Presently she is also the ambassador of Women in 3D Printing, New Delhi, State President of  Haryana for Science & Technology at WICCI, India and host of another Podcast Unstoppable in STEAM. Website https://ruchipathakkaul.com/ LinkedIn https://www.linkedin.com/in/dr-ruchi-pathak-kaul-8b439236/ Book a 30 minute clarity call for your 3D Printing project with (RHS) to know more! https://calendly.com/discovery-call-with-ruchi/virtualmeetup
Non-profit work using 3D Printing by e-Nable Handprints, Glasgow, UK
27-09-2021
Non-profit work using 3D Printing by e-Nable Handprints, Glasgow, UK
Surgeons in 3D Printing Podcast brings together medical professionals, engineers, entrepreneurs, researchers together and foster the spirit of collaboration.Today we have Alistair Bacchetti, Biomedical Student & President of student led non-profit organisation called eNable Handprints, Scotland,Uk. He talks about the vision and execution of the organisation.He also explains the teams and their duties along with the social service that team eNable Handprints delivers for the society.Listen to the entire episode to know the details. Handprints e-NABLE Scotland website: https://www.handprintsenable.com/prosthetics Follow Alistair on his LinkedIn profile: https://www.linkedin.com/in/alistair-bacchetti-3281191a9/ Book a 30 minute clarity call for your 3D Printing project with (RHS) to know more! https://calendly.com/discovery-call-with-ruchi/virtualmeetup   Know your host: Ruchi Pathak Kaul, is a TEDx & Professional Speaker, Author, Maxillofacial Surgeon,Podcaster & Entrepreneur. She is the Founder & Chairman of Reconstructive Healthcare Solutions (RHS) Pvt Ltd, India & Beyond Exponential ltd, UK. Ruchi brings to the table a rich Clinical & Research experience of more than 15 years in healthcare sector. She started as a dentist followed by maxillofacial surgery and then dwelled into research on Medical 3D Printing from AIIMS, New Delhi. She then found Reconstructive Healthcare Solutions Pvt ltd, a health-tech start-up. Ruchi is highly enterprising and is passionate about spreading 3D Printing and emerging technologies like AR/VR/XR across the surgical community for enhanced surgical experience and state of art patient care. Presently she is also the ambassador of Women in 3D Printing, New Delhi, State President of  Haryana for Science & Technology at WICCI, India and host of another Podcast Unstoppable in STEAM. Website https://ruchipathakkaul.com/ LinkedIn https://www.linkedin.com/in/dr-ruchi-pathak-kaul-8b439236/ Book a 30 minute clarity call for your 3D Printing project with (RHS) to know more! https://calendly.com/discovery-call-with-ruchi/virtualmeetup
Back again with a new format: Based on the experience of 50 episodes
20-09-2021
Back again with a new format: Based on the experience of 50 episodes
Surgeons in 3D Printing is a Podcast with the vision to trigger conversations, collaborations and knowledge transfer on 3D Printing and emerging technologies by surgeons, engineers, entrepreneurs and researchers. Know your host: Ruchi Pathak Kaul, is a TEDx & Professional Speaker, Author, Maxillofacial Surgeon,Podcaster & Entrepreneur. She is the Founder & Chairman of Reconstructive Healthcare Solutions (RHS) Pvt Ltd, India & Beyond Exponential ltd, UK. Ruchi brings to the table a rich Clinical & Research experience of more than 15 years in healthcare sector. She started as a dentist followed by maxillofacial surgery and then dwelled into research on Medical 3D Printing from AIIMS, New Delhi. She then found Reconstructive Healthcare Solutions Pvt ltd, a health-tech start-up. Ruchi is highly enterprising and is passionate about spreading 3D Printing and emerging technologies like AR/VR/XR across the surgical community for enhanced surgical experience and state of art patient care. Presently she is also the ambassador of Women in 3D Printing, New Delhi, State President of  Haryana for Science & Technology at WICCI, India and host of another Podcast Unstoppable in STEAM. Website https://ruchipathakkaul.com/ LinkedIn https://www.linkedin.com/in/dr-ruchi-pathak-kaul-8b439236/ Book a 30 minute clarity call for your 3D Printing project with (RHS) to know more! https://calendly.com/discovery-call-with-ruchi/virtualmeetup
Episode 17: Q& A Session
08-07-2021
Episode 17: Q& A Session
This the weekly Question & Answer session of the podcast.We come up with Medical/Dental professionals to answer their queries each Thursday else put them in the form of questions for our weekly guests. Subscribe the Podcast Apple I  Google I  Amazon Music I Spotify I Gaana   To get in touch for Q& A Sessions Email: surgeonsin3dprinting@gmail.com CLICK HERE for the book! Sponsors: Reconstructive Healthcare Solutions Private Ltd. Take the first step to your 3D Printing
Episode 16: Q & A Session
01-07-2021
Episode 16: Q & A Session
This the weekly Question & Answer session of the podcast.We come up with Medical/Dental professionals to answer their queries each Thursday else put them in the form of questions for our weekly guests. Subscribe the Podcast Apple I  Google I  Amazon Music I Spotify I Gaana To get in touch for Q& A Sessions Email: surgeonsin3dprinting@gmail.com CLICK HERE for the book! Sponsors: Reconstructive Healthcare Solutions Private Ltd. Take the first step to your 3D Printing
Episode 15: Q& A Session with Dr Kanchan
24-06-2021
Episode 15: Q& A Session with Dr Kanchan
This the weekly Question & Answer session of the podcast.We come up with Medical/Dental professionals to answer their queries each Thursday else put them in the form of questions for our weekly guests. Subscribe the Podcast Apple I  Google I  Amazon Music I Spotify I Gaana   To get in touch for Q& A Sessions Email: surgeonsin3dprinting@gmail.com  Click here  to find the book "Fundamentals of 3D Printing by Medical /Dental Professionals" Sponsors: Reconstructive Healthcare Solutions Private Ltd. Take the first step to your 3D Printing
14. Q&A Session(Endodontics)
17-06-2021
14. Q&A Session(Endodontics)
This the weekly Question & Answer session of the podcast.We come up with Medical/Dental professionals to answer their queries each Thursday else put them in the form of questions for our weekly guests. To learn basic concepts and start your clinical journey with 3dprinting ,find the book in your amazon store by writing the name of either of the authors in the search bar. The link to the book on amazon.in(Only Kindle version available) Fundamentals of 3D Printing Technology for Medical & Dental Professionals (Illustrated)  For paperback version in India please email us on: surgeonsin3dprinting@gmail.com The link to the kindle version of the book on amazon.co.uk Fundamentals of 3D Printing Technology for Medical & Dental Professionals (Illustrated)  The link to the paperback version of the book on amazon.co.uk Fundamentals of 3D Printing Technology for Medical & Dental Professionals (illustrated)  The link to the kindle version of the book on amazon.com Fundamentals of 3D Printing Technology for Medical & Dental Professionals (Illustrated)  The link to the paperback version of the book on amazon.com Fundamentals of 3D Printing Technology for Medical & Dental Professionals (illustrated) To get in touch for Q& A Sessions Email: surgeonsin3dprinting@gmail.com Visit the website for more information: www.surgeonsin3dprinting.com. Sponsors: Reconstructive Healthcare Solutions Private Ltd. Take the first step to your 3D Printing
13.Masterclass:Applications of Emerging Technologies in Maxillofacial Surgery with Dr Samer Srouji
15-06-2021
13.Masterclass:Applications of Emerging Technologies in Maxillofacial Surgery with Dr Samer Srouji
Dr Samer Srouji is the head of Galilee College of Dental Sciences, Professor & Chair of Oral & Maxillofacial Surgery,Oral Medicine & Dentistry Institute at Galilee Medical Centre, Nahariya, Israel.He is a renowned AOCMF Faculty and a very inspiring surgeon for maxillofacial community.   The You Tube link for this Podcast is  https://youtu.be/l-FLDR2-OYc   Subscribe the Podcast Apple I  Google I  Amazon Music I Spotify I Gaana   To get in touch for Q& A Sessions Email: surgeonsin3dprinting@gmail.com Visit the website for more information: www.surgeonsin3dprinting.com. Sponsors: Reconstructive Healthcare Solutions Private Ltd. Take the first step to your 3D Printing Journey.
12. Q&A Session
10-06-2021
12. Q&A Session
This the weekly Question & Answer session of the podcast.We come up with Medical/Dental professionals to answer their queries each Thursday else put them in the form of questions for our weekly guests. To learn basic concepts and start your clinical journey with 3dprinting ,find the book in your amazon store by writing the name of either of the authors in the search bar. The link to the book on amazon.in(Only Kindle version available) Fundamentals of 3D Printing Technology for Medical & Dental Professionals (Illustrated)  For paperback version in India please email us on: surgeonsin3dprinting@gmail.com The link to the kindle version of the book on amazon.co.uk Fundamentals of 3D Printing Technology for Medical & Dental Professionals (Illustrated)  The link to the paperback version of the book on amazon.co.uk Fundamentals of 3D Printing Technology for Medical & Dental Professionals (illustrated)  The link to the kindle version of the book on amazon.com Fundamentals of 3D Printing Technology for Medical & Dental Professionals (Illustrated)  The link to the paperback version of the book on amazon.com Fundamentals of 3D Printing Technology for Medical & Dental Professionals (illustrated) To get in touch for Q& A Sessions Email: surgeonsin3dprinting@gmail.com Visit the website for more information: www.surgeonsin3dprinting.com. Sponsors: Reconstructive Healthcare Solutions Private Ltd. Take the first step to your 3D Printing
11.Don't Stop Learning: An interesting conversation with a shoulder surgeon from Zurich, Dr Mohy Taha
08-06-2021
11.Don't Stop Learning: An interesting conversation with a shoulder surgeon from Zurich, Dr Mohy Taha
Dr Mohy Taha is an attending doctor for shoulder and elbow surgery, Villa im Park Private Clinic, Rothrist, Switzerland. To connect with him: Fellowships/observerships : https://schulterchirurg.ch/en/fellowships-2/ Publications/ 2 books/Media : https://schulterchirurg.ch/en/media/ 3rd book in Press : https://schulterchirurg.ch/buch/ Website: https://schulterchirurg.ch/en/home/ Linkedin (>16’000 Followers) : https://www.linkedin.com/in/mohy-taha/ Facebook Page: https://www.facebook.com/schulterchirurg.taha Instagram: https://www.instagram.com/mohy_taha/ Youtube Channel: https://www.youtube.com/channel/UCvbYMYNGKg8FUAcGQLBi1NQ Learn more about 3D Printing on https://surgeonsin3dprinting.com/
10. Q&A Session(Dentistry)
03-06-2021
10. Q&A Session(Dentistry)
This the weekly Question & Answer session of the podcast.We come up with Medical/Dental professionals to answer their queries each Thursday else put them in the form of questions for our weekly guests. To learn basic concepts and start your clinical journey with 3dprinting ,find the book in your amazon store by writing the name of either of the authors in the search bar. The link to the book on amazon.in(Only Kindle version available) Fundamentals of 3D Printing Technology for Medical & Dental Professionals (Illustrated)  For paperback version in India please email us on: surgeonsin3dprinting@gmail.com The link to the kindle version of the book on amazon.co.uk Fundamentals of 3D Printing Technology for Medical & Dental Professionals (Illustrated)  The link to the paperback version of the book on amazon.co.uk Fundamentals of 3D Printing Technology for Medical & Dental Professionals (illustrated)  The link to the kindle version of the book on amazon.com Fundamentals of 3D Printing Technology for Medical & Dental Professionals (Illustrated)  The link to the paperback version of the book on amazon.com Fundamentals of 3D Printing Technology for Medical & Dental Professionals (illustrated) To get in touch for Q& A Sessions Email: surgeonsin3dprinting@gmail.com Visit the website for more information: www.surgeonsin3dprinting.com. Sponsors: Reconstructive Healthcare Solutions Private Ltd. Take the first step to your 3D Printing
9.Fundamental of 3D Printing Technology for Medical/Dental Professionals Launch with the authors
01-06-2021
9.Fundamental of 3D Printing Technology for Medical/Dental Professionals Launch with the authors
This Podcast is the launch episode of the bookFundamental of 3D Printing Technology for Medical/Dental Professionals Launch with the authors-Dr Jayanthi Parthasarthy and Dr Ruchi Pathak Kaul. The entire episode discusses various behind the scenes questions about the book and the authors.It also discusses the details of the book and the readers it can benefit. Find the book in your amazon store by writing the name of either of the authors in the search bar. The link to the book on amazon.in(Only Kindle version available) Fundamentals of 3D Printing Technology for Medical & Dental Professionals (Illustrated)  For paperback version in India please email us on: surgeonsin3dprinting@gmail.com The link to the kindle version of the book on amazon.co.uk Fundamentals of 3D Printing Technology for Medical & Dental Professionals (Illustrated)  The link to the paperback version of the book on amazon.co.uk Fundamentals of 3D Printing Technology for Medical & Dental Professionals (illustrated)  The link to the kindle version of the book on amazon.com Fundamentals of 3D Printing Technology for Medical & Dental Professionals (Illustrated)  The link to the paperback version of the book on amazon.com Fundamentals of 3D Printing Technology for Medical & Dental Professionals (illustrated)
8.Q&A Session (Dentistry)
27-05-2021
8.Q&A Session (Dentistry)
This the weekly Question & Answer session of the podcast.We come up with Medical/Dental professionals to answer their queries each Thursday else put them in the form of questions for our weekly guests. Subscribe the Podcast Apple I  Google I  Amazon Music I Spotify I Gaana   To get in touch for Q& A Sessions Email: surgeonsin3dprinting@gmail.com Visit the website for more information: www.surgeonsin3dprinting.com. Sponsors: Reconstructive Healthcare Solutions Private Ltd. Take the first step to your 3D Printing
7. 3D Printing for Orthopaedic Surgery: A conversation with Dr John Erickson
26-05-2021
7. 3D Printing for Orthopaedic Surgery: A conversation with Dr John Erickson
Dr John Erickson is an orthopaedic hand & upper extremity Surgeon at overlook hospital(Atlantic Medical Group),New Jersey, United States.   Subscribe the Podcast Apple I  Google I  Amazon Music I Spotify I Gaana   To get in touch for Q& A Sessions Email: surgeonsin3dprinting@gmail.com Visit the website for more information: www.surgeonsin3dprinting.com. Sponsors: Reconstructive Healthcare Solutions Private Ltd. Take the first step to your 3D Printing Journey.
6.Beyond Telemedicine: Conversation with Dr S Farokh Atashzar from NYU
18-05-2021
6.Beyond Telemedicine: Conversation with Dr S Farokh Atashzar from NYU
S. Farokh Atashzar is an Assistant Professor of Electrical and Computer Engineering, as well as Mechanical and Aerospace Engineering at New York University (NYU). He leads the Medical Robotics and Interactive Intelligent Technologies (MERIIT) Laboratory, at NYU. To know more : Here's a link to his website : Medical Robotics and Interactive Intelligent Technologies Lab Subscribe the Podcast Apple I  Google I  Amazon Music I Spotify I Gaana   To get in touch for Q& A Sessions Email: surgeonsin3dprinting@gmail.com Visit the website for more information: www.surgeonsin3dprinting.com. Sponsors: Reconstructive Healthcare Solutions Private Ltd. Take the first step to your 3D Printing Journey.
5.Q&A Session(Dental)
13-05-2021
5.Q&A Session(Dental)
This is the weekly Q&A session on this podcast.We will come up with Medical/Dental Professionals to answer their queries each Thursday or else put them in the form of questions for our weekly guests on each Tuesday.Connect with us on our email if you have questions on Medical 3D Printing. surgeonsin3dprinting@gmail.com  Subscribe the Podcast Apple I  Google I  Amazon Music I Spotify I Gaana   To get in touch for Q& A Sessions Email: surgeonsin3dprinting@gmail.com Visit the website for more information: www.surgeonsin3dprinting.com. Sponsors: Reconstructive Healthcare Solutions Private Ltd. Take the first step to your 3D Printing